DULUX PRECISION OIL BASED PRIMER - 4 LITRE

About PRECISION High Opacity Stain Blocker

- Blocks stains from migrating though the topcoat
- Hides dark stains and colours
- Ideal for grease, smoke, tannin, graffiti and water stains.

Description

Dulux PRECISION® High Opacity Stain Blocker is an oil-based, fast drying, superior stain blocker for a wide range of water and oil-based stains.

At a glance

- Ideal for stains caused by fire, rust, lipstick, markers, tannin bleed, sap and knots.
- Touch dry 45min, Re-coat 1.5hrs. - Suitable for use under Dulux topcoats.
- Interior and exterior use.
- Blocks water and oil-based stains such as food, drinks, grease, smoke, nicotine, water, mould, graffiti and crayon.

Application

- Brush
- Roller
- Spray
- Touch dry - 45 minutes
- Re-coat timbe - 1.5 hours
- Cleaning materials - Mineral Turpentine

Product Specification

Areas of use

- Wall
- Celing

Performance guide

- Food and beverage
- Grease
- Smoke
- Nicotine
- Water Stains
- Mould Stains
- Graffiti
- Crayon
- Stains caused by fire damage
- Rust
- Lipstick
- Markers
- Tannin Bleed
- Sap Streaks and Knots

Surfaces

Use on interior & spot exterior surfaces including: 

- Paper-faced plasterboard
- Timber
- MDF
- Chipboard
- Plywood
- Aged enamel
- Brick
- Render
- Masonary
- Concrete
- Cement sheet
- Previously painted surfaces and suitably primed steel

Surface Preparation

Remove as much of the stain as possible by cleaning with Selleys® Sugar Soap, sanding, scraping, etc. 

Previously painted surfaces: 

Scrape off loose and flaking paint. Wash with Selleys® Sugar Soap to remove grease and grime. 

Fill nail holes and cracks with a suitable filler, then sand smooth. 

How to Apply

Brush, roller

Bare timber including weatherboards and hardboards:

Sand bare timber to a clean surface and dust down. 

Fill nail holes and cracks with suitable filler, then sand smooth and dust off. 

Chalky surfaces: 

Sand back to a strongly bound surface and dust off. 

High gloss or hard, aged enamel surfaces: Sand to a dull finish. 

Plasterboard, masonry, MDF, render, concrete, cement sheet, suitably primed steel, galvanised iron and ZINCALUME®: 

Fill holes and other imperfections with a suitable filler, sand and dust off. 

Allow cement render and concrete to cure for a minimum of 28 days before applying Dulux PRECISION® High Opacity Stain Blocker.