FIDDES PAINT & VARNISH REMOVER 1LT

Fiddes Paint & Varnish Remover, is a DCM (Dichloromethane) – Free, fast acting all-purpose Stripper that is ideal and effective for removing multiple coats of Varnish, Paint, Lacquer and French Polish from a wide range of substrates including timber, glass, masonry and metal.
Suitable for internal and external preparation, Fiddes Paint & Varnish Remover penetrates deeply into the surface, providing a powerful blistering reaction on application.

Preparation:

• Ensure immediate and surrounding areas are well protected and use gloves and eye protection.
• Sand to remove any loose coating and surface debris.

Application:

• Apply generously using a brush, ensuring all areas are fully covered.
• Leave for 10 minutes, allowing enough time for the existing coating to blister.
• Apply a second coat, again working well into areas where blistering has occurred.
• Leave for 20-25 minutes, test area and remove coating accordingly with a scraper or course steel wool.
• Repeat if necessary.
• Neutralize with White Spirit or warm water.
• Clean brushes in White Spirit or warm soapy water.

*For best results, when using externally in warm/dry conditions, it is recommended to cover the treated area with a plastic drop sheet. This will allow the Paint & Varnish Remover to penetrate the surface without drying out.