KLEVA KLIP ADJUSTABLE GAL JOIST HANGER BOX 24 ( 45MM )

 Advantages of the Adjustable Joist Support 

• Keeps your joists off the concrete and free of unwanted moisture ingress. This Prevents Joist-Rot Through The Bottom Of Your Joists.

• Is Ideal For Use On Area Where The Concrete Has Built In "Fall" - To Provide A Level Deck.

• Quick and easy to use - purpose-built for the application

• Gives a neat, professional look across your deck structure without resorting to various different packers and brackets to achieve your end result   

• Uses standard M10 10mm hex head bolts, Nuts,Washers and 12 mm dynabolts or 10 mm masonry bolts either supplied in AJKIT or purchased separately from  your Hardware Store/Merchant if you are using the AJH45G or AJH50G.

Minimum and Maximum Top of Joist Information

Minimum top of joist heights

76 mm – fixing joist bracket direct to concrete no base-plate no bolts and using 70mm joist

86 mm – using Joist Support KIT- lowest height achievable using base-plate, 100mm fully treaded bolts and joist bracket with 70mm joist

86 mm – using Adjustable Joist Support AJH45G- lowest height achievable using base-plate, 60mm bolts and joist bracket with 70mm joist

106 mm – using Joist Support KIT- lowest height achievable using base-plate, 100mm fully threaded bolts and joist bracket with 90mm joist

106 mm – using Adjustable Joist Support AJH45G - lowest height achievable using base-plate, 60mm bolts and joist bracket with 90mm joist

116 mm – using Adjustable Joist Support AJH50G - lowest height achievable using base-plate, 60mm bolts and joist bracket with 100mm joist

Maximum top of joist heights

150 mm – using Joist Support KIT,100mm bolts & 90mm joist

170 mm – using Adjustable Joist Support AJH45G, 120mm bolts & 90mm joist

180 mm – using Adjustable Joist Support AJH50G, 120mm bolts & 100mm joist

180 mm – using Joist Support KIT, 100mm bolts & 120mm joist

200 mm – using Adjustable Joist Support AJH45G, 120mm bolts & 120mm joist

232 mm – using Adjustable Joist Support AJH50G, 120mm bolts & 150mm joist

200 mm – using Joist Support KIT, 100mm bolts & 140mm joist

220 mm – using Adjustable Joist Support AJH45G, 120mm bolts & 140mm joist

230 mm – using Adjustable Joist Support AJH50G, 120mm bolts & 150mm joist

Note – the above information is a “practical” rather than an “absolute” document. There will be a number of ways to achieve the heights mentioned with different sized joists, however the installer should always be mindful to operate within the KlevaKlip product parameters and relevant joist span tables.