Availability: In stock

$324.04 each

Product Description



Applications: SMX-30P is a solvent, and water-free universal parquet adhesive based upon SMX Polymers. Suitable for indoor bonding of all types of wooden floors such as solid, stab, pre-finished, and on-end parquet, wood-plank, wood-block and laminates. Suitable for use on porous and non-porous substrates such as mosaic, anhydrite, concrete, screeds, wood, chipboard and OSB Board (large particle size chipboard) , including floors with underfloor heating. SMX-30P is also extremely suitable for bonding moisture sensitive wood onto moderately porous surfaces.

Description: SMX-30P cures by means of a chemical reaction within the adhesive. Once fully cured (approx. 24 hrs. at 21°C and 50% RH) an elastic and non-shrinkable adhesive layer is formed, which is resistant to moisture and heat. The adhesive has excellent adhesion to most common substrates used in the construction industry. SMX-30P contains no water or solvents, minimising the risk of deforming the parquet to a minimum.

Shelf-life: 9 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and +25°C.

Packaging: Colour: light oak (RAL1001) Packaging: 3 alu-bags in a plastic bucket (3 x 6 kg = 18kg). The high-quality packaging guarantees an optimum shelf-life of the product. Separate packaging permits flexibility in use.

Substrate: Before installation of the parquet, the substrate should be checked to ensure it is suitable. Check the moisture content throughout the entire thickness of the substrate with a carbide or electric hygrometer. The moisture content must be as recommended by the flooring manufacturer (generally max. 2% for sand cement substrates and max. 0,5% for anhydrite, measured with a carbide hygrometer. For substrates with underfloor heating the values are resp. max. 1,5% and 0,3%)

SMX-30P should be applied to an even, dry, clean and smooth substrate, which is free from irregularities and cracks. Rests of old adhesives may affect the adhesion and must be removed mechanically. Loose or damaged surfaces must be repaired before the application of the adhesive.

Powdery surface can be treated (after consulting our technical service) with Soudal WBPR-21 Deep Primer.

Very porous surfaces can be treated (after consulting our technical service) with Soudal WBPR-11 Surface Primer.

Subfloors with a higher moisture content than described above can be treated (after consulting our technical service) with Soudal EPR-31P.

Smooth surfaces like anhydrite should be roughened and disposed of the top layer. Sanded subfloor must be vacuum cleaned with an industrial vacuum cleaner.

When installing a parquet floor on top of marble, terrazzo or ceramic tiles they must be first cleaned with caustic soda or another suitable cleaner. Once cleaned, rinse the tiles thoroughly with plenty of clean water. Ensure the floor is completely dry before applying the SMX-30P.

A preliminary compatibility test is recommended on every surface.

Additional Information

Additional Information

SKU 120626