DIY Projects - Technical Data Sheets

So you have a Do-It-Yourself project in mind but you’re not quite sure how to build it?

Provided below is a list of common projects that Wilson Timbers is famous for supplying all the quality materials necessary to get the job done.

Simply download the Technical Data Sheet, work out what you need and then go to our product section to begin shopping. 

Choose from the following selection: 

* 01 - Timber Panelling * 19 - Pergolas & Carports 
*  02 - Finishes for Exterior Timber     * 20 - Residential Timber Fences
*  03 - Treated Pine Cladding *  21 - Sanding  - Finishing Timber Floors
*  04 - Residential Timber Decks *  22 - LIght Organic Solvent Preservative Treated Timber
*  05 - Cypress and Hardwood Cladding *  23 - Timber Handrail & Balustrades
*  06 - Treated Pine - Outdoors *  24 - Recommendations for use of H3
*  07 - Timber Decks Commercial, Industrial & Marine *  25 - Outdoor Timber Performance
*  08 - Timber Garden Walls ( Up to 1 Metre High ) *  26 - Truss Installation 
* 09 - Timber Retaining Walls - Residential *  27 - Measuring the Moisture Content of Timber 
* 10 - Seasoned Softwood Framing *  28 - Moisture in Timber
* 11 - Tongue & Groove Timber Flooring - General Information   *  29 - Moisture Effects on In Service Performance
* 12 - Termite Management of New Buildings *  30 - Fire Hazard Properties
*  13 - Residential Timber Decks Close to or on to the Ground       *  31 - Acceptable Appearance from Timber Floors
*  14 - Sub Floor Ventilation *   32 - Wind Tie Down Connections - Getting it Right
*  15 - Specifying Timber *  33 - Separating Walls - Class 1A Buildings, Duplexes, Townhouses, Row Houses and Terrance Houses 
*  16a - Species , Properties & Uses *  34 - Timber Treatment Brands
*  16b - Species , Properties & Uses  - Tables *  35 - Corrosion Resistance of Metal Connectors
* 17 - Timber Floors Pre-Installation Assessment * 36 - Parapet Construction
* 18 - Timber Floors - Recommended Installation Practices * 37 - Ceiling Diaphragm Action and Lateral Load Transfer in Nail Plated Timber Roof Systems
    * 38 - Timber and Stains - Tannin , Moulds, Iron Etc

 




Note:  The above Technical Data Sheets are provided by Timber Queensland and their design relate to general Queensland conditions.  Seek further information in areas of different design load requirements (i.e in Alpine areas - snow loads, or Earthquake prone areas).3